Shenandoah Valley 4-Wheelers....Making Tracks, But Treading Lightly | |
http://sv4w.com/cgi-bin/yabb2/YaBB.pl
General >> SV4WRC >> my crawler http://sv4w.com/cgi-bin/yabb2/YaBB.pl?num=1279251847 Message started by Rob on Jul 15th, 2010 at 10:44pm |
Title: my crawler Post by Rob on Jul 15th, 2010 at 10:44pm
Baught this off rccrawler... it was a good deal but all i need is a ESC... would like one that is lipo friendly. anyway axial based crawler
|
Title: Re: my crawler Post by jeremy on Jul 16th, 2010 at 8:49am
cool
|
Title: Re: my crawler Post by Rob on Jul 21st, 2010 at 10:36pm
i need a controler and an esc that will work with a dig
|
Title: Re: my crawler Post by jeremy on Jul 23rd, 2010 at 2:37am
dx3r
mamba max or sidewinder |
Title: Re: my crawler Post by Rob on Jul 24th, 2010 at 3:28am
could i use a traxxas tq with a 3 channel receiver and use the high/low switch for the dig?
|
Title: Re: my crawler Post by K Riccardi on Jul 25th, 2010 at 8:58am Rob wrote on Jul 24th, 2010 at 3:28am:
Yes you could, 3 position switch mod is easy. Gay but it would work. FXR or almost anything from Castle for a ESC. Look on RCC for used stuff. |
Title: Re: my crawler Post by kevin on Jul 25th, 2010 at 8:24pm Rob wrote on Jul 24th, 2010 at 3:28am:
yes you can. the only problem you can run into is not being able to adjust your end point settings on the 3rd channel which can be a pain if you have to fine tune it. |
Title: Re: my crawler Post by Rob on Jul 26th, 2010 at 12:19am
i am looking for a Dx3r now... not having much luck
|
Title: Re: my crawler Post by K Riccardi on Jul 26th, 2010 at 6:40am
I love my DX3, not to be confused with anything else. DX3.0. Must be a DX3
|
Title: Re: my crawler Post by Rob on Dec 10th, 2010 at 4:35am
I am still looking for an esc and controler
|
Title: Re: my crawler Post by jeremy on Dec 10th, 2010 at 7:47am Rob wrote on Dec 10th, 2010 at 4:35am:
I've seen a few on rccrawler |
Title: Re: my crawler Post by Travis on Dec 10th, 2010 at 8:02am
I have a rooster crawler if your interested.45 bucks
|
Title: Re: my crawler Post by Travis on Dec 10th, 2010 at 8:03am
I also have a tq3 conroller 15 bucks.
|
Title: Re: my crawler Post by Rob on Feb 23rd, 2011 at 11:17pm
got a esc, reciver, and a controler... now i need batteries. im running a Rooster crawler. any ideas.
|
Title: Re: my crawler Post by Travis on Feb 24th, 2011 at 8:44am
2s lipo at ckrccrawlers
|
Title: Re: my crawler Post by K Riccardi on Feb 24th, 2011 at 9:47am
2 cell lipo is the limit for that rooster?
|
Title: Re: my crawler Post by Travis on Feb 24th, 2011 at 11:18am
YES
|
Title: Re: my crawler Post by Rob on Feb 24th, 2011 at 4:22pm
can you get me a link to that travis
|
Shenandoah Valley 4-Wheelers....Making Tracks, But Treading Lightly » Powered by YaBB 2.5 AE! YaBB Forum Software © 2000-2010. All Rights Reserved. |